How to Replace The Bottom Shower Door Seal

Rédigé par : Omar Escobedo
  • Commentaires : 0
How to Replace The Bottom Shower Door Seal

Difficulté

Easy

Étapes

7

Temps nécessaire

10 - 30 minutes

Introduction

This step-by-step guide shows how to replace the shower door seal found at the bottom of the shower door. Generally speaking, the shower door seal strip should be replaced every 1-2 years; however, also consider replacing it if it is torn, cracked, or too dirty.

  1. BPUGKWZHFpmMf1vd
    BPUGKWZHFpmMf1vd
    pOfqcDcWBfLPai4A

    • Remove the old shower door seal by sliding it off the door.

  2. hgHrCYCwPNx3IXLp
    hgHrCYCwPNx3IXLp
    yXCcAtfSu6kJFfCK

    • Clean the area where the old seal was at the bottom of the shower door.

  3. QRRcU22Nw4mhhns3

    • Measure the old shower door seal.

  4. wD3pRvyEMRnyIJJg

    • Mark how long the new shower door seal should be per the previous measurement.

  5. FbAom6NFBmMJMNEA

    • Cut the new shower door seal on the mark placed in the previous step.

    • Use whichever cutting tool is available that can cut this material.

  6. Kwh2pZC4BQKqTX2A

    • Sand/Smooth Off the side of the seal that was cut in previous step.

  7. F6CTi3GLoHPM16gK
    F6CTi3GLoHPM16gK
    WYjpTfwaIkVB4IuQ
    Z3d4XC1autHQCgE1

    • Slide the new seal on with the deflector facing the inside of the shower.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

Omar Escobedo

Membre depuis le 23/10/23

145 Réputation

0 commentaires