Introduction

Les iPhone 6 et 6 Plus sont parfois touchés par un défaut fatal : avec le temps, la soudure qui fixe les puces TouchIC sur la carte mère fléchit et se fissure avec le téléphone. Lorsque votre téléphone se trouve dans votre poche, il se courbe naturellement en suivant les contours de votre corps, mais il n'a jamais été conçu pour cela. Ce problème est lié à un support de châssis inadéquat, qui expose ces puces TouchIC à des contraintes excessives au fil du temps.

En cas d'écran tactile iPhone bloqué, lié à des puces TouchIC abîmées, vous aurez besoin de l'aide d'un centre de réparation professionnel pour résoudre le problème. Ce tutoriel vous montre comment écarter les autres causes avant de décider de l'emmener dans un centre de réparation ou de changer de téléphone.

N'oubliez pas de lire également cet article pour plus d'informations sur le problème d’un écran iPhone bloqué : http://ifixit.org/blog/8309/iphone-6-plu...

  1. TKTFY6gi3JQpAZYP
    • Dans les jeux de hasard, trois barres sont considérées comme le signe que vous avez gagné. Ce n'est pas le cas ici. Si votre téléphone affiche une barre blanche en haut de l'écran, c'est le signe qu’il a chopé la Touch Disease. Apportez-le à un centre de réparation qui pourra réparer la soudure cassée.

    • Il est possible de plier le téléphone pour le remettre en place et rétablir la fonctionnalité tactile, mais cette solution n'est que temporaire et le vrai problème refera surface, peut-être à un moment encore moins opportun. Pensez-y comme si une roue de secours, c’est une solution temporaire !

    How much many?

    Briked Durrsi -

  2. oqdVy3qXIBnVNS6L
    • Si vous avez tendance à garder votre téléphone dans votre poche quand vous vous asseyez, il se peut qu'il ait progressivement changé de forme et présente une légère courbure. Cette courbure peut être à l'origine des problèmes d’écran tactile iPhone bloqué.

    • Une courbure de votre téléphone, légère ou plus prononcée comme sur cette photo, ainsi que des problèmes de tactile intermittents peuvent indiquer un tactile iPhone qui ne fonctionne plus, même si vous n'avez pas la barre tactile mentionnée à l'étape 1.

  3. rFDspEQ2MVjRE1GJ
    • Si votre écran iPhone fissuré et bloqué, ou si vous avez récemment fait tomber le téléphone, votre première étape devrait être de vérifier avec un écran de rechange. Utilisez un tutoriel iFixit pour la procédure à suivre, et voyez si le changement d'écran iPhone résout le problème.

    • Même si votre écran n'est pas fissuré, le problème peut être lié à un écran iPhone cassé, qui a juste besoin d'être changé.

    • De même, si changer l'écran résout le problème, celui-ci peut réapparaître quelques heures ou quelques jours plus tard. Il est moins probable qu'il s'agisse d'un écran défectueux que d'un problème d’écran tactile iPhone bloqué.

Conclusion

Si vous observez des barres ou une courbure, adressez-vous à un centre de réparation ou sortez votre attirail de microsoudure électronique, pour vous assurer que la soudure de votre iPhone n'est pas en train de lâcher.

Matt Zieminski

Membre depuis le 23/02/15

40105 Réputation

16 commentaires

"...you've got Touch Disease. Take it to a repair shop."

...and have them do what?

William Totman -

Hey that's a good point! A repair shop can generally fix this by fixing the solder, the point of failure in these devices. It won't necessarily protect it forever from having the same issue but it will restore functionality for the foreseeable future. I'll update the guide to detail that!

Matt Zieminski -

Which chip exactly are they soldering?

Nemesio Diego -

One or both of these https://instagram.com/p/BCq2pPQitTN/

U2401 and U2402

Trent -

90% of the time we replace the Meson Touch IC on the iphone 6 plus and that resolves the issue. https://www.instagram.com/p/BL1HCQTg2rk/...

Wires Computing -

The close proximity of cumulus and Meson to each other means that by replacing one you are always reflowing the other. Reflowing these is not a long term solution because the exposed pads on the bad joints oxidize which doesn't allow a good joint to form. It may leave your shop working, but will easily fail again. You should always replace both.

Also, I've found that the "grey bars" can often be intermittently fixed by applying pressure directly to cumulus which would indicate that it is the source of the fault.

shaffermarka -

Thanks my friend.. & clear explanation

AbdelHadi -

iphone 6 light jamper

doctormobileizeh -

It might be a good idea to put up a link to the ifixit.org article regarding touch disease. The article explains in a good amount of detail with out being over technical for the do it yourself-er or novice. It seems that there are repair techs that are installing a metal shield over the 2 chips that act as reinforcement. It was tested and seems to be more durable than the oem design. It would be nice if we could reinforce the aluminum frame so the "Bendgate" problem doesn't occur.

Kari -

Great idea! I'll update the guide now to include a link to that article.

Matt Zieminski -

Or you can put a piece of electrical tape between the IC and the sticker that covers it.

Jasmine -

So if this is a known issue with the Iphone 6, why is Apple not fixing it? I have only had my phone for a few months.

joannesafi -

I can only speculate as to why Apple won't acknowledge the issue. They have a history of ignoring or avoiding a problem until things get to a breaking point, however.

Matt Zieminski -

I had this issue with my iphone 6.

I replaced the screen but issues persisted, however I noticed that when I was installing the screen worked perfectly (i tested before re-assembling).

After assembly issue was intermittent but mainly not working. Some random twisting of phone would get rouch to work again but not for long.

I opened up again and removed the plate which protected the connectors from screen ribbon cables, phone worked perfectly! I figured this plate must have something to do with issue; rather than removing completely I just removed the central screw. (there are 5 in total).

https://imgur.com/4iXxPHD

Still working great after 24hrs…

ed jones -

I had this issue with one of my relative’s phone. She dropped the phone, ever since the phone needs to be twisted once a while to be able working fine. She decided to replace it with the new screen but turn out become not working at all. The repair guys told her that the ic chip needs to be fixed and it will cost her $80. I checked on the youtube and found this tricks. He used the used sim card to place under the plate…moreover, I don’t have to spend money at all to buy the kits. https://www.youtube.com/watch?v=Bk76ED87....

VIOLLA….. working great ever since. I highly recommended using that trick if your phone has the same issue.

Ethan Hawk -

I’m also now dealing with this problem, asked someone to hold my phone, and she had it in her back pocket when she went to sit down. I stopped her in mid-sit but it was too late. I never had any issues with the touch screen before, now it’s toast.

Mike Storck -